How to relocate a baby grand piano

Pianos consistently make movers annual list of items that are most regularly harmed. Grand pianos are particularly bothersome. Practicing the following treatments for dismantling, padding and packing grand pianos will prevent damage, lower claims expenditure, and enhance customer satisfaction.

1) At least three individuals are required to manage a child grand piano. If the infant grand piano requires to increase or down stairs or if a complete or show grand piano requires to be transferred, a minimum of 4 individuals are required.

2) Constantly finish a precise and thorough inventory. It may be necessary or preferable to utilize a visual stock to sufficiently explain and show pre-existing damage.

3) As various parts are taken apart, please place all hardware in a correctly labeled parts bag and after that put the parts bag in a "Parts Box".

4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furniture pad.

5) Disconnect the lid by getting rid of the hinge pins. Wrap the lid in a clean furnishings pad.

6) Remove the prop that holds the lid open and wrap it in a tidy furnishings pad. The prop has a hinge pin and is in 2 pieces.

7) Eliminate the pedal assembly and cover it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When removing the screws, please take care not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the suitable number on each rod. Note: If masking tape is not available, please usage correctly labeled parts bags for this purpose. When reassembling at destination, please make sure to put the rods in the right order so that the pedals will work effectively.

8) Pad the piano by putting a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you deal with the piano. Keep in mind: Please make sure that the surface of the piano is dust-free before padding it.

9) Position a piano board and attach the straps so that it is all set to receive the piano. The raised brace on the piano board need to be at the keyboard end of the piano.

10) Eliminate the left front leg by positioning a single person below the piano at the left end of the keyboard. The other two individuals ought to support the left front corner. The individual underneath the piano need to turn the retaining block so that the long end points away from the leg. The screws, if there are any, should then be eliminated. The "underneath" person needs to then get out from under the piano before in fact removing the leg. Make sure to have 2 people lifting the corner of the piano while the third individual gets rid of the leg. Note: Please be sure to note which legs were eliminated from which positions given that some pianos have legs that are not browse this site interchangeable.

11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the entire piano slightly while finishing this maneuver to prevent undue pressure on the staying, connected legs as the piano ideas. Be sure that the piano is centered comfortably against the brace at the end of the piano board.

12) Get rid of the two staying legs and wrap them in tidy furnishings pads. These legs are held in place by a "essential and slot" arrangement. To get rid of the leg, slide it inward toward the center of the piano till it comes out of the slot.

13) Secure the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads but under the straps to offer extra protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.

14) To move the piano over a flat, level more info here surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for security against house damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to prevent the piano from slipping.

16) To load the piano, leave it on the piano board and place it in a tier as the first base product with the keyboard facing the wall of the preceding tier. The best place to load the padded lid is between the piano and the preceding tier or between the piano and the wall.

Grand pianos represent a considerable difficulty, they can be moved without damage by using common sense and practicing the treatments listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *